Firesafer has gained trust as abc dry powder fire extinguisher refilling machine manufacturers.
Our equipment can meet the needs of various fire extinguisher types and different production capacities. Whether for fire extinguisher repair and filling services, small-batch fire extinguisher production, or fire extinguisher manufacturing in large fire factories, you can find the most suitable equipment here. Contact us for free quote.
a d v a n t a g e s
The one-stop solution includes customized equipment LOGO, equipment material, software program development, assembly tooling, etc.
The customized equipment is equipped with electrical components such as PLC, ventilation system, air switch, fuse, AC contactor protector, phase sequence protector, etc., to ensure a longer life of the equipment during use.
Memiliki peralatan pemadam kebakaran yang baik dapat membuat bisnis Anda lebih mudah dan sederhana.
Anda dapat memproduksi lebih banyak alat pemadam kebakaran secara bersamaan, sehingga memungkinkan Anda untuk dengan cepat menguasai pasar dan mendapatkan daya saing pasar yang lebih baik.
Peralatan yang sangat otomatis dapat meningkatkan efisiensi produksi Anda dan mengurangi biaya tenaga kerja.
Dengan menyempurnakan rantai industri Anda, Anda dapat dengan cepat memproduksi alat pemadam kebakaran dengan logo merek Anda untuk memenuhi kebutuhan konsumen dengan lebih baik.
The dry powder fire extinguisher filling machine is one of the fire extinguisher filling machines, which can be used to fill dry powder to the fire extinguisher. Dry powder fire extinguisher filling machine improves production efficiency and the quality and reliability of filling and inflation.
The product we developed adopts vacuum jet technology, which can realize the rapid inhalation of dry powder into the filling cylinder and allow the dry powder to be inhaled and filled at the same time.
Advantage:
1. Check the hose
Before starting filling, check the hose connection of the filling machine for looseness. If there is any looseness, please tighten it immediately.
2. Test the power supply unit
Turn on the power supply of the dry powder filling machine and conduct a test on the dry powder filling machine. During the machine test, it should be connected to the ground wire to check whether the rotation of the air pump of the filling machine meets the filling requirements. Connect them tightly to avoid powder leakage due to loose interfaces.
3. Move fire extinguisher
Put the cylinder to be filled on the weighing platform of the electronic scale, then put the filling end cap on the cover, press the corresponding button, and then return to the O position on the platform.
4. Start filling
Turn on the start switch, and the filling machine will start running at this time. When the powder suction tube enters the powder source, the powder is sucked into the cylinder through the pipeline, when the weighing is close to the fixed value, the powder absorption is appropriately reduced through the powder suction tube, and once the weighing is reached, the suction tube is taken out and filled.
As a professional manufacturer of dry powder fire extinguishers filling machine, firesafer must remind everyone of the following precautions. During the use of the dry powder filling equipment, once there is a problem, you can diagnose where the problem is by checking the power supply and machine components. Only in this way can the filling machine run normally. In addition, when the dry powder filling machine is not in use, it should be placed in a dry and ventilated place to avoid damage to the machine due to the wet ground. Special staff should also be arranged to inspect and maintain the machine regularly.
Setelah Anda mengisi formulir, sebuah spesialis peralatan pemadam kebakaran akan menghubungi Anda dalam waktu 24 jam.
Tujuan pertama kami adalah memahami kebutuhan Anda, kemudian bersama-sama mengembangkan rencana bisnis dan memberikan harga terbaik untuk Anda!
+86 15521103013
+86 15521103013
Kami akan menghubungi Anda dalam waktu 1 jam, mohon perhatikan email dengan akhiran tersebut. “@firesafer.com”.
